Adam W, Saha-Möller C R, Ganeshpure P A
Institute of Organic Chemistry, University of Würzburg, Am Hubland, D-97074 Würzburg, Germany.
Chem Rev. 2001 Nov;101(11):3499-548. doi: 10.1021/cr000019k.
Nonmetal oxidation catalysts have gained much attention in recent years. The reason for this surge in activity is 2-fold: On one hand, a number of such catalysts has become readily accessible; on the other hand, such catalysts are quite resistant toward self-oxidation and compatible under aerobic and aqueous reaction conditions. In this review, we have focused on five nonmetal catalytic systems which have attained prominence in the oxidation field in view of their efficacy and their potential for future development; stoichiometric cases have been mentioned to provide overview and scope. Such nonmetal oxidation catalysts include the alpha-halo carbonyl compounds 1, ketones 2, imines 3, iminium salts 4, and nitroxyl radicals 5. In combination with a suitable oxygen source (H2O2, KHSO5, NaOCl), these catalysts serve as precursors to the corresponding oxidants, namely, the perhydrates I, dioxiranes II, oxaziridines III, oxaziridinium ions IV, and finally oxoammonium ions V. A few of the salient features about these nonmetal, catalytic systems shall be reiterated in this summary. The first class entails the alpha-halo ketones, which catalyze the oxidation of a variety of organic substrates [figure: see text] by hydrogen peroxide as the oxygen source. The perhydrates I, formed in situ by the addition of hydrogen peroxide to the alpha-halo ketones, are quite strong electrophilic oxidants and expectedly transfer an oxygen atom to diverse nucleophilic acceptors. Thus, alpha-halo ketones have been successfully employed for catalytic epoxidation, heteroatom (S, N) oxidation, and arene oxidation. Although high diastereoselectivities have been achieved by these nonmetal catalysts, no enantioselective epoxidation and sulfoxidation have so far been reported. Consequently, it is anticipated that catalytic oxidations by perhydrates hold promise for further development, especially, and should ways be found to transfer the oxygen atom enantioselectively. The second class, namely, the dioxiranes, has been extensively used during the last two decades as a convenient oxidant in organic synthesis. These powerful and versatile oxidizing agents are readily available from the appropriate ketones by their treatment [figure: see text] with potassium monoperoxysulfate. The oxidations may be performed either under stoichiometric or catalytic conditions; the latter mode of operation is featured in this review. In this case, a variety of structurally diverse ketones have been shown to catalyze the dioxirane-mediated epoxidation of alkenes by monoperoxysulfate as the oxygen source. By employing chiral ketones, highly enantioselective (up to 99% ee) epoxidations have been developed, of which the sugar-based ketones are so far the most effective. Reports on catalytic oxidations by dioxiranes other than epoxidations are scarce; nevertheless, fructose-derived ketones have been successfully employed as catalysts for the enantioselective CH oxidation in vic diols to afford the corresponding optically active alpha-hydroxy ketones. To date, no catalytic asymmetric sulfoxidations by dioxiranes appear to have been documented in the literature, an area of catalytic dioxirane chemistry that merits attention. A third class is the imines; their reaction with hydrogen peroxide or monoperoxysulfate affords oxaziridines. These relatively weak electrophilic oxidants only manage to oxidize electron-rich substrates such as enolates, silyl enol ethers, sulfides, selenides, and amines; however, the epoxidation of alkenes has been achieved with activated oxaziridines produced from perfluorinated imines. Most of the oxidations by in-situ-generated oxaziridines have been performed stoichiometrically, with the exception of sulfoxidations. When chiral imines are used as catalysts, optically active sulfoxides are obtained in good ee values, a catalytic asymmetric oxidation by oxaziridines that merits further exploration. The fourth class is made up by the iminium ions, which with monoperoxysulfate lead to the corresponding oxaziridinium ions, structurally similar to the above oxaziridine oxidants except they possess a much more strongly electrophilic oxygen atom due to the positively charged ammonium functionality. Thus, oxaziridinium ions effectively execute besides sulfoxidation and amine oxidation the epoxidation of alkenes under catalytic conditions. As expected, chiral iminium salts catalyze asymmetric epoxidations; however, only moderate enantioselectivities have been obtained so far. Although asymmetric sulfoxidation has been achieved by using stoichiometric amounts of isolated optically active oxaziridinium salts, iminium-ion-catalyzed asymmetric sulf-oxidations have not been reported to date, which offers attractive opportunities for further work. The fifth and final class of nonmetal catalysts concerns the stable nitroxyl-radical derivatives such as TEMPO, which react with the common oxidizing agents (sodium hypochlorite, monoperoxysulfate, peracids) to generate oxoammonium ions. The latter are strong oxidants that chemoselectively and efficiently perform the CH oxidation in alcohols to produce carbonyl compounds rather than engage in the transfer of their oxygen atom to the substrate. Consequently, oxoammonium ions behave quite distinctly compared to the previous four classes of oxidants in that their catalytic activity entails formally a dehydrogenation, one of the few effective nonmetal-based catalytic transformations of alcohols to carbonyl products. Since less than 1 mol% of nitroxyl radical is required to catalyze the alcohol oxidation by the inexpensive sodium hypochlorite as primary oxidant under mild reaction conditions, this catalytic process holds much promise for future practical applications.
近年来,非金属氧化催化剂备受关注。这种活性激增的原因有两方面:一方面,许多此类催化剂已易于获得;另一方面,此类催化剂对自氧化具有相当的抗性,并且在有氧和水相反应条件下具有相容性。在本综述中,鉴于其功效和未来发展潜力,我们重点关注了在氧化领域中崭露头角的五种非金属催化体系;提及了化学计量的情况以提供概述和范围。此类非金属氧化催化剂包括α-卤代羰基化合物1、酮2、亚胺3、亚胺鎓盐4和硝酰基自由基5。与合适的氧源(过氧化氢、过硫酸氢钾、次氯酸钠)结合使用时,这些催化剂可作为相应氧化剂的前体,即过氧化物I、二氧杂环丙烷II、氮杂环丙烷III、氮杂环丙烷鎓离子IV,最终是氧鎓离子V。在本总结中将重申这些非金属催化体系的一些显著特征。第一类是α-卤代酮,它以过氧化氢作为氧源催化多种有机底物的氧化反应[图:见正文]。通过向α-卤代酮中加入过氧化氢原位形成的过氧化物I是相当强的亲电氧化剂,预期会将氧原子转移到各种亲核受体上。因此,α-卤代酮已成功用于催化环氧化、杂原子(硫、氮)氧化和芳烃氧化。尽管这些非金属催化剂已实现了高非对映选择性,但迄今为止尚未报道对映选择性环氧化和硫氧化反应。因此,可以预期过氧化物催化氧化反应具有进一步发展的潜力,特别是如果能找到对映选择性转移氧原子的方法。第二类,即二氧杂环丙烷,在过去二十年中已被广泛用作有机合成中的便利氧化剂。这些强大且通用的氧化剂可通过用单过硫酸钾处理相应的酮轻松获得[图:见正文]。氧化反应可以在化学计量或催化条件下进行;本综述重点介绍后一种操作模式。在这种情况下,已表明多种结构不同的酮可催化以单过硫酸钾作为氧源的二氧杂环丙烷介导的烯烃环氧化反应。通过使用手性酮,已开发出高对映选择性(高达99% ee)的环氧化反应,其中基于糖的酮是迄今为止最有效的。除环氧化反应外,关于二氧杂环丙烷催化氧化反应的报道很少;然而,源自果糖的酮已成功用作邻二醇中对映选择性CH氧化反应的催化剂,以得到相应的光学活性α-羟基酮。迄今为止,文献中似乎尚未记载二氧杂环丙烷催化的不对称硫氧化反应,这是二氧杂环丙烷催化化学中一个值得关注的领域。第三类是亚胺;它们与过氧化氢或单过硫酸钾反应生成氮杂环丙烷。这些相对较弱的亲电氧化剂只能氧化富电子底物,如烯醇盐、硅烯醇醚、硫化物、硒化物和胺;然而,通过全氟亚胺生成的活化氮杂环丙烷已实现烯烃的环氧化反应。除硫氧化反应外,大多数原位生成的氮杂环丙烷的氧化反应都是按化学计量进行的。当使用手性亚胺作为催化剂时,可获得具有良好ee值的光学活性亚砜,这是一种值得进一步探索的氮杂环丙烷催化不对称氧化反应。第四类由亚胺鎓离子组成,它与单过硫酸钾反应生成相应的氮杂环丙烷鎓离子,其结构与上述氮杂环丙烷氧化剂相似,只是由于带正电荷的铵官能团,它们具有更强亲电的氧原子。因此,氮杂环丙烷鎓离子在催化条件下除了能有效进行硫氧化和胺氧化反应外,还能实现烯烃的环氧化反应。正如预期的那样,手性亚胺鎓盐可催化不对称环氧化反应;然而,迄今为止仅获得了中等的对映选择性。尽管使用化学计量的分离的光学活性氮杂环丙烷鎓盐已实现了不对称硫氧化反应,但迄今为止尚未报道亚胺鎓离子催化的不对称硫氧化反应,这为进一步的研究提供了有吸引力的机会。第五类也是最后一类非金属催化剂涉及稳定的硝酰基自由基衍生物,如TEMPO,它与常见的氧化剂(次氯酸钠、单过硫酸钾、过酸)反应生成氧鎓离子。后者是强氧化剂,能化学选择性地和有效地进行醇中的CH氧化反应以生成羰基化合物,而不是将其氧原子转移到底物上。因此,氧鎓离子与前四类氧化剂的行为截然不同,因为它们的催化活性形式上是脱氢反应,这是少数几种将醇有效转化为羰基产物的基于非金属的催化转化反应之一。由于在温和的反应条件下,以廉价的次氯酸钠作为主要氧化剂催化醇氧化反应所需的硝酰基自由基不到1 mol%,因此该催化过程在未来实际应用中具有很大的潜力。