Department of Earth and Environmental Sciences, Faculty of Science & Engineering, Macquarie University, Sydney, NSW, 2109, Australia.
Department of Earth and Environmental Sciences, Faculty of Science & Engineering, Macquarie University, Sydney, NSW, 2109, Australia.
Environ Pollut. 2021 Aug 15;283:117064. doi: 10.1016/j.envpol.2021.117064. Epub 2021 Apr 1.
Limited attention has been given to the presence of MPs in the atmospheric environment, particularly in indoor environments where people spend about 90% of their time. This study quantitatively assesses the prevalence, source and type of MPs in Australian homes with the goal of evaluating human health exposure potential. Thirty-two airborne indoor deposited dust samples were collected in glass Petri dishes from Sydney (Australia) homes, over a one-month period in 2019. Participants completed a questionnaire on their household characteristics. Samples were analysed using a stereomicroscope, a fluorescent microscope and micro-Fourier transform infrared (FTIR) spectroscopy for their colour, size, shape and composition. Inhalation and ingestion rates were modelled using US EPA exposure factors. Microplastic fibre deposition rates ranged from 22 to 6169 fibres/m/day. Deposited dust comprised 99% fibres. The highest proportion of fibres (19%) were 200-400 μm in length. The majority were natural (42%); 18% were transformed natural-based fibres; and 39% were petrochemical based. A significant difference was observed between the deposition rate and the main floor covering (p-value <0.05). Polyethylene, polyester, polyamide, polyacrylic, and polystyrene fibres were found in higher abundance in homes with carpet as the main floor covering. Where carpet was absent, polyvinyl fibres were the most dominant petrochemical fibre type, indicating the role of flooring materials (e.g. wood varnishes) in determining MP composition. Vacuum cleaner use was significantly related to MP deposition rates (p-value <0.05). MP ingestion rates peaked at 6.1 mg/kg-B/year for ages 1-6, falling to a minimum of 0.5 mg/kg-B/year in >20 years age group. Mean inhaled MP weight and count was determined to be 0.2±0.07 mg/kg-B/year and 12891±4472 fibres/year. Greatest inhalation intake rates were for the <0.5-yr age group, at 0.31 mg/kg-B/year. The study data reveal that MPs are prevalent in Australian homes and that the greatest risk of exposure resides with young children. Notwithstanding the limited number of global studies and the different methods used to measure MPs, this study indicates Australian deposition and inhalation rates are at the lower end of the exposure spectrum.
目前,人们对大气环境中 MPs 的存在(尤其是在人们大约 90%的时间都处于其中的室内环境中)关注较少。本研究通过定量评估澳大利亚家庭中 MPs 的存在情况、来源和类型,旨在评估其对人类健康的潜在暴露风险。2019 年,在一个月的时间内,我们使用玻璃培养皿从澳大利亚悉尼的家庭中采集了 32 个室内空气沉降灰尘样本。参与者填写了一份关于家庭特征的问卷。我们使用立体显微镜、荧光显微镜和微傅里叶变换红外(FTIR)光谱法对样本的颜色、大小、形状和成分进行分析。我们使用美国环保署的暴露因子对吸入和摄入率进行了建模。微塑料纤维的沉积速率范围为 22 至 6169 纤维/天。沉积灰尘中 99%是纤维。最长的纤维(19%)长度为 200-400 μm。大多数纤维(42%)是天然纤维;18%是经过转化的天然纤维;39%是石化纤维。沉积率与主要地板覆盖物之间存在显著差异(p 值<0.05)。在地毯作为主要地板覆盖物的家庭中,发现了更多的聚乙烯、聚酯、聚酰胺、聚丙烯酸和聚苯乙烯纤维。在没有地毯的地方,聚氯乙烯纤维是最主要的石化纤维类型,这表明地板材料(例如木器清漆)在确定 MPs 成分方面发挥了作用。使用真空吸尘器与 MP 沉积率显著相关(p 值<0.05)。MP 摄入量峰值出现在 1-6 岁年龄组,为 6.1 mg/kg-B/年,20 岁以上年龄组的摄入量最低,为 0.5 mg/kg-B/年。确定的平均吸入 MP 重量和数量分别为 0.2±0.07 mg/kg-B/年和 12891±4472 纤维/年。<0.5 岁年龄组的最大吸入摄入量最高,为 0.31 mg/kg-B/年。研究数据表明,MPs 在澳大利亚家庭中普遍存在,而儿童面临的最大暴露风险。尽管全球研究数量有限,且用于测量 MPs 的方法也不同,但本研究表明,澳大利亚的沉积和吸入率处于暴露范围的较低端。