Key Laboratory of Agro-Forestry Environmental Processes and Ecological Regulation of Hainan Province (Hainan University), Haikou 570228, China; Key Laboratory of Environmental Toxicology (Hainan University), Haikou 570228, China.
Hainan Holdings Special Glass Technology Co. Ltd., State Key Laboratory of Special Glass, Chengmai 571924, China.
J Hazard Mater. 2023 Mar 5;445:130535. doi: 10.1016/j.jhazmat.2022.130535. Epub 2022 Dec 1.
Currently, information on microplastics (MPs) weathering characteristics and ecological functions driven by MPs-associated microbes in mangrove ecosystems remains unclear, especially in the degraded areas. Herein, we compared the weathering characteristics of MPs in both undegraded and degraded mangrove sediments, and then explored the potential interactions between their weathering characteristics and microbially-driven functions. After 70 days of incubation, different MPs (including polyethylene PE, polystyrene PS, and polylactic acid PLA) were strongly weathered in mangrove sediments, with significant erosion features. Interestingly, more obvious weathering characteristics were found for MPs in the undegraded mangrove sediments. O/C ratio value of MPs in the undegraded sediments was 2.3-3.0 times greater than that in the degraded ones. Besides, mangrove degradation reduced network complexity among MPs-associated microorganisms and affected their metabolic activities. Bacteria involved in carbon cycle process enriched on nondegradable MPs, whereas abundant bacteria responsible for sulphur cycle were observed on PLA-MPs. Moreover, these relevant bacteria were more abundant on MPs in the undegraded mangrove sediments. Mangrove degradation could directly and indirectly affect MPs weathering process and microbially-driven functions through regulating sediment properties and MPs-associated microbes. During weathering, contact angle and roughness of MPs were key factors influencing the colonisation of hydrocarbon degradation bacteria on MPs.
目前,有关红树林生态系统中与微塑料(MPs)相关的微生物驱动的 MPs 风化特征和生态功能的信息尚不清楚,尤其是在退化区域。在此,我们比较了未退化和退化红树林沉积物中 MPs 的风化特征,然后探讨了它们的风化特征与微生物驱动功能之间的潜在相互作用。经过 70 天的孵育,不同的 MPs(包括聚乙烯(PE)、聚苯乙烯(PS)和聚乳酸(PLA))在红树林沉积物中强烈风化,具有明显的侵蚀特征。有趣的是,在未退化的红树林沉积物中,MPs 的风化特征更为明显。未退化沉积物中 MPs 的 O/C 比值是退化沉积物的 2.3-3.0 倍。此外,红树林退化减少了 MPs 相关微生物之间的网络复杂性,并影响了它们的代谢活性。参与碳循环过程的细菌在不可降解的 MPs 上富集,而大量负责硫循环的细菌则在 PLA-MPs 上观察到。此外,这些相关细菌在未退化的红树林沉积物中的 MPs 上更为丰富。红树林退化可以通过调节沉积物性质和 MPs 相关微生物,直接和间接地影响 MPs 的风化过程和微生物驱动的功能。在风化过程中,接触角和粗糙度是影响烃类降解细菌在 MPs 上定植的关键因素。