School of Chemical and Environmental Engineering, Technical University of Crete, Chania GR-73100, Greece.
Department of Environmental Engineering, Technical University of Denmark, DK-2800 Kongens Lyngby, Denmark.
Environ Sci Technol. 2023 May 30;57(21):8130-8138. doi: 10.1021/acs.est.3c01430. Epub 2023 May 17.
The durability of plastics in the marine environment has emerged as a crucial environmental issue. However, the contribution of several factors and the threshold point after which a plastic product generates secondary micro- and nanoplastics is still unclear. To investigate the interaction of environmental parameters with the physicochemical properties of polyethylene (PE) and polypropylene (PP) films in the marine environment, polyolefin films were subjected to weathering in emulated coastal and marine environments for 12 months, focusing on the relationship between radiation load, alteration on the surface, and subsequent generation of microplastics (MPs). The weight average molecular weight () was found to be strongly correlated with the generated particles and the Feret diameter, implying the generation of secondary microplastics at decreased . A significant and strong relationship between the carbonyl index (CI) and the Feret diameter for PP films weathered on beach sand was identified. This CI-fragmentation relationship involves three sequential stages and suggests that spontaneous fragmentation occurs at CI values above 0.7.
塑料在海洋环境中的耐久性已成为一个关键的环境问题。然而,几个因素的贡献以及塑料产品产生次生微塑料和纳米塑料的临界点尚不清楚。为了研究环境参数与聚乙烯(PE)和聚丙烯(PP)薄膜在海洋环境中的物理化学性质之间的相互作用,将聚烯烃薄膜在模拟沿海和海洋环境中进行了 12 个月的风化处理,重点研究了辐射负荷、表面变化与随后产生的微塑料(MPs)之间的关系。发现重均分子量(Mw)与生成的颗粒和 Feret 直径密切相关,表明Mw 降低时会产生次生微塑料。还确定了在海滩砂上风化的 PP 薄膜的羰基指数(CI)与 Feret 直径之间存在显著且强烈的关系。该 CI-断裂关系涉及三个连续阶段,表明自发断裂发生在 CI 值高于 0.7 时。