Dhumal Ravindra S, Shimpi Shamkant L, Paradkar Anant R
Department of Pharmaceutics, Bharati Vidyapeeth University, Poona College of Pharmacy and Research Centre, Erandawane, Pune-411038 Maharashtra, India.
Acta Pharm. 2007 Sep;57(3):287-300. doi: 10.2478/v10007-007-0023-7.
The purpose of this study was to obtain an amorphous system with minimum unit operations that will prevent recrystallization of amorphous drugs since preparation, during processing (compression) and further storage. Amorphous celecoxib, solid dispersion (SD) of celecoxib with polyvinyl pyrrollidone (PVP) and co-precipitate with PVP and carrageenan (CAR) in different ratios were prepared by the spray drying technique and compressed into tablets. Saturation solubility and dissolution studies were performed to differentiate performance after processing. Differential scanning calorimetry and X-ray powder difraction revealed the amorphous form of celecoxib, whereas infrared spectroscopy revealed hydrogen bonding between celecoxib and PVP. The dissolution profile of the solid dispersion and co-precipitate improved compared to celecoxib and amorphous celecoxib. Amorphous celecoxib was not stable on storage whereas the solid dispersion and co-precipitate powders were stable for 3 months. Tablets of the solid dispersion of celecoxib with PVP and physical mixture with PVP and carrageenan showed better resistance to recrystallization than amorphous celecoxib during compression but recrystallized on storage. However, tablets of co-precipitate with PVP and carageenan showed no evidence of crystallinity during stability studies with comparable dissolution profiles. This extraordinary stability of spray-dried co-precipitate tablets may be attributed to the cushioning action provided by the viscoelastic polymer CAR and hydrogen bonding interaction between celecoxib and PVP. The present study demonstrates the synergistic effect of combining two types of stabilizers, PVP and CAR, on the stability of amorphous drug during compression and storage as compared to their effect when used alone.
本研究的目的是获得一种单元操作最少的无定形体系,该体系可防止无定形药物在制备过程中、加工(压片)过程以及进一步储存期间发生重结晶。通过喷雾干燥技术制备了无定形塞来昔布、塞来昔布与聚乙烯吡咯烷酮(PVP)的固体分散体(SD)以及塞来昔布与PVP和卡拉胶(CAR)以不同比例形成的共沉淀物,并将其压制成片剂。进行了饱和溶解度和溶出度研究以区分加工后的性能。差示扫描量热法和X射线粉末衍射显示塞来昔布为无定形形式,而红外光谱显示塞来昔布与PVP之间存在氢键。与塞来昔布和无定形塞来昔布相比,固体分散体和共沉淀物的溶出曲线有所改善。无定形塞来昔布在储存时不稳定,而固体分散体和共沉淀粉末在3个月内稳定。塞来昔布与PVP的固体分散体片剂以及与PVP和卡拉胶的物理混合物片剂在压片过程中比无定形塞来昔布表现出更好的抗重结晶性,但在储存时会重结晶。然而,在稳定性研究中,与PVP和卡拉胶形成的共沉淀物片剂在具有可比溶出曲线的情况下未显示出结晶迹象。喷雾干燥共沉淀物片剂的这种非凡稳定性可能归因于粘弹性聚合物CAR提供的缓冲作用以及塞来昔布与PVP之间的氢键相互作用。本研究证明了与单独使用时相比,两种稳定剂PVP和CAR组合对无定形药物在压片和储存过程中的稳定性具有协同作用。