Anisuzzaman S M, Joseph Collin G, Krishnaiah D, Bono A, Ooi L C
Chemical Engineering Programme, Faculty of Engineering, Universiti Malaysia Sabah, Kota Kinabalu 88400, Sabah, Malaysia E-mail:
Water Research Unit, Faculty of Science and Natural Resources, Universiti Malaysia Sabah, Kota Kinabalu 88400, Sabah, Malaysia.
Water Sci Technol. 2015;72(6):896-907. doi: 10.2166/wst.2015.247.
In this study, durian (Durio zibethinus Murray) skin was examined for its ability to remove methylene blue (MB) dye from simulated textile wastewater. Adsorption equilibrium and kinetics of MB removal from aqueous solutions at different parametric conditions such as different initial concentrations (2-10 mg/L), biosorbent dosages (0.3-0.7 g) and pH solution (4-9) onto durian skin were studied using batch adsorption. The amount of MB adsorbed increased from 3.45 to 17.31 mg/g with the increase in initial concentration of MB dye; whereas biosorbent dosage increased from 1.08 to 2.47 mg/g. Maximum dye adsorption capacity of the durian skin was found to increase from 3.78 to 6.40 mg/g, with increasing solution pH. Equilibrium isotherm data were analyzed according to Langmuir and Freundlich isotherm models. The sorption equilibrium was best described by the Freundlich isotherm model with maximum adsorption capacity of 7.23 mg/g and this was due to the heterogeneous nature of the durian skin surface. Kinetic studies indicated that the sorption of MB dye tended to follow the pseudo second-order kinetic model with promising correlation of 0.9836 < R(2) < 0.9918.
在本研究中,对榴莲(Durio zibethinus Murray)皮去除模拟纺织废水中亚甲基蓝(MB)染料的能力进行了研究。采用分批吸附法研究了在不同参数条件下,如不同初始浓度(2 - 10 mg/L)、生物吸附剂用量(0.3 - 0.7 g)和溶液pH值(4 - 9)下,榴莲皮对水溶液中MB的吸附平衡和动力学。随着MB染料初始浓度的增加,MB的吸附量从3.45 mg/g增加到17.31 mg/g;而生物吸附剂用量从1.08 mg/g增加到2.47 mg/g。随着溶液pH值的增加,发现榴莲皮的最大染料吸附容量从3.78 mg/g增加到6.40 mg/g。根据朗缪尔和弗伦德里希等温线模型对平衡等温线数据进行了分析。弗伦德里希等温线模型能最好地描述吸附平衡,最大吸附容量为7.23 mg/g,这是由于榴莲皮表面的不均匀性质所致。动力学研究表明,MB染料的吸附倾向于遵循伪二级动力学模型,相关系数为0.9836 < R² < 0.9918。