Sturm Robert
Department of Materials Science and Physics, Division of Physics and Biophysics, University of Salzburg, Salzburg, Austria.
Ann Transl Med. 2017 Apr;5(7):154. doi: 10.21037/atm.2017.03.28.
The present contribution deals with the theoretical description of aerosol bolus dispersion in lungs being affected by different manifestations of emphysema. The work constructs the hypothesis that each manifestation of emphysema exhibits specific properties with regard to the dispersion of inhaled and exhaled aerosol boluses as well as the deposition of particles from the aerosol pulse.
For an appropriate simulation of single emphysematous manifestations, a previously developed model assuming (I) a random variation of alveolar diameters, (II) an exact localization of diseased structures, and (III) a realistic balance between alveolar air volume and number of air sacs was applied. Dispersion of inhaled and exhaled aerosol boluses was simulated by using the mathematical concept of effective diffusivities. Computations were conducted for an average adult lung (FRC =3,300 mL), symmetric breath-cycles with a length 8 s, and inhalation flow rates of 250 mL/s. Particles used for the model predictions had a uniform diameter of 0.84 µm and a density of 1 g/cm.
According to the theoretical data obtained from the model highest aerosol bolus dispersion may be observed in lungs affected by panacinar and bullous emphysema, whereas centriacinar and paraseptal emphysema cause a significant reduction of the phenomenon. Also other statistical parameters exhibit partly remarkable differences among the studied manifestations. Particle deposition in lungs affected by bullous emphysema falls below that of lungs impaired by the other types of emphysema by 2%-50%.
From the hypothetical results presented in this study it may be concluded that aerosol bolus inhalation bears a certain potential for the diagnosis of emphysematous structures and, if applied with sufficient accuracy, also for the distinction of single manifestations of emphysema. For a successful use of the technique, however, all statistical bolus parameters and particle deposition have to be subjected to a detailed evaluation.
本研究致力于对受不同类型肺气肿影响的肺部气溶胶团块扩散进行理论描述。该研究提出一个假设,即每种肺气肿类型在吸入和呼出的气溶胶团块扩散以及气溶胶脉冲中颗粒的沉积方面都具有特定属性。
为了对单一肺气肿类型进行适当模拟,应用了一个先前开发的模型,该模型假设(I)肺泡直径随机变化,(II)病变结构精确定位,以及(III)肺泡空气体积与气囊数量之间达到实际平衡。通过有效扩散率的数学概念模拟吸入和呼出的气溶胶团块扩散。针对平均成年肺(功能残气量 = 3300 mL)、长度为8秒的对称呼吸周期以及250 mL/s的吸入流速进行计算。用于模型预测的颗粒直径均匀为0.84 µm,密度为1 g/cm³。
根据模型获得的理论数据,在全小叶型和大疱性肺气肿影响的肺部中可观察到最高的气溶胶团块扩散,而小叶中央型和间隔旁型肺气肿会使该现象显著减少。在所研究的类型中,其他统计参数也部分呈现出显著差异。大疱性肺气肿影响的肺部中的颗粒沉积比其他类型肺气肿受损的肺部低2% - 50%。
从本研究提出的假设结果可以得出,吸入气溶胶团块在诊断肺气肿结构方面具有一定潜力,并且如果应用足够准确,还可用于区分单一类型的肺气肿。然而,为了成功应用该技术,所有气溶胶团块统计参数和颗粒沉积都必须进行详细评估。