Suppr超能文献

使用前凸型腰椎椎间融合器增强后路腰椎内固定和融合,随后进行后路翻修:一项初步可行性研究。

Overpowering posterior lumbar instrumentation and fusion with hyperlordotic anterior lumbar interbody cages followed by posterior revision: a preliminary feasibility study.

作者信息

Kadam Abhijeet, Wigner Nathan, Saville Philip, Arlet Vincent

出版信息

J Neurosurg Spine. 2017 Dec;27(6):650-660. doi: 10.3171/2017.5.SPINE16926. Epub 2017 Sep 29.

Abstract

OBJECTIVE The authors' aim in this study was to evaluate whether sagittal plane correction can be obtained from the front by overpowering previous posterior instrumentation and/or fusion with hyperlordotic anterior lumbar interbody fusion (ALIF) cages in patients undergoing revision surgery for degenerative spinal conditions and/or spinal deformities. METHODS The authors report their experience with the application of hyperlordotic cages at 36 lumbar levels for ALIFs in a series of 20 patients who underwent revision spinal surgery at a single institution. Included patients underwent staged front-back procedures: ALIFs with hyperlordotic cages (12°, 20°, and 30°) followed by removal of posterior instrumentation and reinstrumentation from the back. Patients were divided into the following 2 groups depending on the extent of posterior instrumentation and fusion during the second stage: long constructs (≥ 6 levels with extension into thoracic spine and/or pelvis) and short constructs (< 6 levels). Preoperative and postoperative standing radiographs were evaluated to measure segmental lordosis (SL) along with standard sagittal parameters. Radiographic signs of pseudarthrosis at previously fused levels were also sought in all patients. RESULTS The average patient age was 54 years (range 30-66 years). The mean follow-up was 11.5 months (range 5-26 months). The mean SL achieved with 12°, 20°, and 30° cages was 13.1°, 19°, and 22.4°, respectively. The increase in postoperative SL at the respective surgically treated levels for 12°, 20°, and 30° cages that were used to overpower posterior instrumentation/fusion averaged 6.1° (p < 0.05), 12.5° (p < 0.05), and 17.7° (p < 0.05), respectively. No statistically significant difference was found in SL correction at levels in patients who had pseudarthrosis (n = 18) versus those who did not (n = 18). The mean overall lumbar lordosis increased from 44.3° to 59.8° (p < 0.05). In the long-construct group, the mean improvement in sagittal vertical axis was 85.5 mm (range 19-249.3 mm, p < 0.05). Endplate impaction/collapse was noted in 3 of 36 levels (8.3%). The anterior complication rate was 13.3%. No neurological complications or vascular injuries were observed. CONCLUSIONS ALIF in which hyperlordotic cages are used to overpower posterior spinal instrumentation and fusion can be expected to produce an increase in SL of a magnitude that is roughly half of the in-built cage lordotic angle. This technique may be particularly suited for lordosis correction from the front at lumbar levels that have pseudarthrosis from the previous posterior spinal fusion. Meticulous selection of levels for ALIF is crucial for safely and effectively performing this technique.

摘要

目的 本研究作者的目的是评估在接受退行性脊柱疾病和/或脊柱畸形翻修手术的患者中,通过用前凸型前路腰椎椎间融合(ALIF)椎间融合器克服先前的后路内固定和/或融合,能否从前方获得矢状面矫正。方法 作者报告了他们在一家机构对20例接受脊柱翻修手术的患者应用36个腰椎节段的前凸型椎间融合器进行ALIF的经验。纳入的患者接受分期前后路手术:使用前凸型椎间融合器(12°、20°和30°)进行ALIF,然后从后方取出后路内固定并重新置入内固定。根据第二阶段后路内固定和融合的范围,将患者分为以下两组:长节段固定(≥6个节段并延伸至胸椎和/或骨盆)和短节段固定(<6个节段)。评估术前和术后站立位X线片,以测量节段性前凸(SL)以及标准矢状面参数。还在所有患者中寻找先前融合节段的假关节影像学征象。结果 患者平均年龄为54岁(范围30 - 66岁)。平均随访时间为11.5个月(范围5 - 26个月)。使用12°、20°和30°椎间融合器获得的平均SL分别为13.1°、19°和22.4°。用于克服后路内固定/融合的12°、20°和30°椎间融合器在各自手术治疗节段的术后SL增加量平均分别为6.1°(p < 0.05)、12.5°(p < 0.05)和17.7°(p < 0.05)。在有假关节的患者(n = 18)与无假关节的患者(n = 18)中,节段矫正度在统计学上无显著差异。总体腰椎前凸平均从44.3°增加到59.8°(p < 0.05)。在长节段固定组中,矢状垂直轴的平均改善为85.5 mm(范围19 - 249.3 mm,p < 0.05)。36个节段中有3个(8.3%)出现终板撞击/塌陷。前路并发症发生率为13.3%。未观察到神经并发症或血管损伤。结论 使用前凸型椎间融合器克服后路脊柱内固定和融合的ALIF有望使SL增加,增加幅度约为内置椎间融合器前凸角度的一半。该技术可能特别适用于因先前后路脊柱融合而出现假关节的腰椎节段从前方矫正前凸。精心选择ALIF的节段对于安全有效地实施该技术至关重要。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验