Eco-friendly extraction and physicochemical properties of pectin from jackfruit peel waste with subcritical water.

BACKGROUND

Water is generally considered to be a safe and green solvent suitable for use in natural product extraction. In this study, an eco-friendly subcritical water method was used to extract pectin from waste jackfruit peel (JFP-S), which was compared with pectin obtained by the traditional citric acid method (JFP-C).

RESULTS

The extraction process was optimized using response surface methodology (RSM), and the optimum process parameters were as follows: extraction temperature 138 °C, extraction time 9.15 min, liquid / solid (L/S) ratio 17.03 mL g . Under these conditions, the pectin yield was 149.6 g kg (dry basis). Pectin obtained from the two extraction methods displayed a high degree of esterification and the monosaccharide composition was consistent. The galacturonic acid content of JFP-S and JFP-C was 52.27% and 56.99%, respectively. JFP-S had more hairy regions and side chains than JFP-C. The molecular weight of JFP-S was 113.3 kDa, which was significantly lower than that of JFP-C (174.3 kDa). Fourier-transform infrared spectroscopy (FTIR) indicated that two samples had similar pectin typical absorption peaks. According to differential scanning calorimetry (DSC), both JFP-S and JFP-C had relatively good thermal stability. JFP-S demonstrated lower apparent viscosity and elasticity than JFP-C. Meanwhile, the G' and G'' moduli of JFP-S were lower, which found expression in the gel textural characterization of the samples.

CONCLUSION

This work showed that the subcritical water method is an efficient, time-saving, and eco-friendly technology for the extraction of pectin from jackfruit peel compared with the traditional citric acid method. The physicochemical properties of pectin could be changed during subcritical water extraction. © 2019 Society of Chemical Industry.