Suppr超能文献

一种用于通过表面等离子体共振灵敏检测血红蛋白浓度的纳米层结构。

A nanolayered structure for sensitive detection of hemoglobin concentration using surface plasmon resonance.

作者信息

Singh Maneesh Kumar, Pal Sarika, Verma Alka, Das Ritwick, Prajapati Yogendra Kumar

机构信息

Department of Electronics Engineering, National Institute of Technology Uttarakhand, Srinagar, Pauri Garhwal, Uttarakhand 246174 India.

Department of Electronics and Communication Engineering, Institute of Engineering and Rural Technology Allahabad, Prayagraj, Uttar Pradesh 211002 India.

出版信息

Appl Phys A Mater Sci Process. 2021;127(11):832. doi: 10.1007/s00339-021-04985-w. Epub 2021 Oct 13.

Abstract

The objective of the proposed work is to design a biosensor that monitors hemoglobin (Hb) concentration using the combination of nanolayer, i.e., barium titanate (BaTiO) and antimonene based on surface plasmon resonance (SPR) technique. Antimonene is used here as bio-recognition element (BRE) layer to attach the Hb analyte through physical adsorption due to its hydrophilic nature, higher adsorption energy and larger active surface area. The use of BaTiO adlayer (7 nm) just before antimonene is to enhance the refractive index (RI) sensitivity up to 1.90 times for the proposed SPR biosensor. The reason behind sensitivity enhancement is its high dielectric constant which enhances the electromagnetic field with in analyte medium. The performance of the biosensor is demonstrated with performance parameters namely sensitivity, detection accuracy (DA), figure of merit (FOM) and resolution. The proposed biosensor has potential to achieve much higher performance in terms of RI sensitivity of 303.83°/RIU, FOM of 50.39 RIU and resolution of 0.021 g/l in comparison with reported biosensors in the literature for detection of Hb concentration. Thus, based on the obtained results one can say that the proposed work unlocks a reliable sensing in the field of medical science to detect hemoglobin-related diseases in human being.

摘要

本研究工作的目标是基于表面等离子体共振(SPR)技术,设计一种结合纳米层(即钛酸钡(BaTiO))和锑烯来监测血红蛋白(Hb)浓度的生物传感器。由于锑烯具有亲水性、较高的吸附能和较大的活性表面积,在此用作生物识别元件(BRE)层,通过物理吸附附着Hb分析物。在锑烯之前使用7纳米的BaTiO附加层,可使所提出的SPR生物传感器的折射率(RI)灵敏度提高至1.90倍。灵敏度提高的原因在于其高介电常数,可增强分析物介质中的电磁场。通过灵敏度、检测准确度(DA)、品质因数(FOM)和分辨率等性能参数来展示生物传感器的性能。与文献中报道的用于检测Hb浓度的生物传感器相比,所提出的生物传感器在RI灵敏度为303.83°/RIU、FOM为50.39 RIU和分辨率为0.021 g/l方面具有实现更高性能的潜力。因此,基于所获得的结果,可以说本研究工作开启了医学领域中检测人类血红蛋白相关疾病的可靠传感技术。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/3d23/8511850/1e8d66fec208/339_2021_4985_Fig1_HTML.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验