Efficient removal of nano- and micro- sized plastics using a starch-based coagulant in conjunction with polysilicic acid.

Microplastic (MP) pollution has increasingly become an enormous global challenge due to the ubiquity and uncertain environmental performance, especially for nano- and micro- sized MPs. In this work, the performance and mechanisms in coagulation of 100 nm-5.0 μm sized polystyrene particles using an etherified starch-based coagulant (St-CTA) assisted by polysilicic acid (PSA) were systematically studied on the basis of the changes in MPs removal rates under various pH levels and in the presence of different coexisting inorganic and organic substances, zeta potentials of supernatants, and floc properties. St-CTA in conjunction with PSA had a high performance in coagulation of nano- and micro- sized MPs from water with a lower optimal dose and larger and compacter flocs. Besides, the MPs removal rate can be improved in acidic and coexisting salt conditions. The efficient performance in removal of MPs by this enhanced coagulation was owing to the synergic effect, that is, the effective aggregation of MPs through the charge neutralization of St-CTA followed by the efficient netting-bridging effect of PSA. The effectiveness of this enhanced coagulation was further confirmed by removal of two other typical nano-sized MPs, such as poly(methyl methacrylate) and poly(vinyl chloride), from different water sources including tap water, river water, and sludge supernatant from a sewage treatment plant. This work provided a novel enhanced coagulation technique that can effectively remove nano- and micro- sized MPs from water.