Suppr超能文献

室温下制备的具有ZnO:H/ZnO双有源层的高性能薄膜晶体管。

High-Performance Thin-Film Transistors with ZnO:H/ZnO Double Active Layers Fabricated at Room Temperature.

作者信息

Wang Daoqin, Jiang Zongjin, Li Linhan, Zhu Deliang, Wang Chunfeng, Han Shun, Fang Ming, Liu Xinke, Liu Wenjun, Cao Peijiang, Lu Youming

机构信息

Shenzhen Key Laboratory of Special Functional Materials, Guangdong Research Centre for Interfacial Engineering of Functional Materials, College of Materials Science and Engineering, Shenzhen University, Shenzhen 518000, China.

出版信息

Nanomaterials (Basel). 2023 Apr 20;13(8):1422. doi: 10.3390/nano13081422.

Abstract

H doping can enhance the performance of ZnO thin-film transistors (TFTs) to a certain extent, and the design of double active layers is an effective way to further improve a device's performance. However, there are few studies on the combination of these two strategies. We fabricated TFTs with ZnO:H (4 nm)/ZnO (20 nm) double active layers by magnetron sputtering at room temperature, and studied the effect of the hydrogen flow ratio on the devices' performance. ZnO:H/ZnO-TFT has the best overall performance when H/(Ar + H) = 0.13% with a mobility of 12.10 cm/Vs, an on/off current ratio of 2.32 × 10, a subthreshold swing of 0.67 V/Dec, and a threshold voltage of 1.68 V, which is significantly better than the performance of single active layer ZnO:H-TFTs. This exhibits that the transport mechanism of carriers in double active layer devices is more complicated. On one hand, increasing the hydrogen flow ratio can more effectively suppress the oxygen-related defect states, thus reducing the carrier scattering and increasing the carrier concentration. On the other hand, the energy band analysis shows that electrons accumulate at the interface of the ZnO layer close to the ZnO:H layer, providing an additional path for carrier transport. Our research exhibits that the combination of a simple hydrogen doping process and double active layer construction can achieve the fabrication of high-performance ZnO-based TFTs, and that the whole room temperature process also provides important reference value for the subsequent development of flexible devices.

摘要

氢掺杂可以在一定程度上提高氧化锌薄膜晶体管(TFT)的性能,而设计双有源层是进一步提升器件性能的有效方法。然而,关于这两种策略相结合的研究较少。我们通过室温磁控溅射制备了具有ZnO:H(4纳米)/ZnO(20纳米)双有源层的TFT,并研究了氢气流比对于器件性能的影响。当H/(Ar + H) = 0.13%时,ZnO:H/ZnO-TFT具有最佳的整体性能,其迁移率为12.10厘米²/(伏·秒),开/关电流比为2.32×10⁵,亚阈值摆幅为0.67伏/十倍频程,阈值电压为1.68伏,显著优于单有源层ZnO:H-TFT的性能。这表明双有源层器件中载流子的传输机制更为复杂。一方面,增加氢气流比可以更有效地抑制与氧相关的缺陷态,从而减少载流子散射并增加载流子浓度。另一方面,能带分析表明电子在靠近ZnO:H层的ZnO层界面处积累,为载流子传输提供了一条额外的路径。我们的研究表明,简单的氢掺杂工艺与双有源层结构相结合能够实现高性能氧化锌基TFT的制备。而且,整个室温工艺也为后续柔性器件的发展提供了重要的参考价值。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/dc90/10145049/21bfa45f99d3/nanomaterials-13-01422-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验