AdventHealth Tampa, Digestive Health Institute, Tampa, FL, USA.
Ann Surg Oncol. 2023 Dec;30(13):8559-8560. doi: 10.1245/s10434-023-14256-y. Epub 2023 Sep 8.
Minimally invasive resection for perihilar cholangiocarcinoma is an emerging technique that requires both mastery in minimally invasive liver resection and biliary reconstruction. Due to technical difficulties in biliovascular dissection, radical portal lymphadenectomy and the need for fine suturing during bilioenteric anastomosis, this type of resection is generally not performed laparoscopically, even at high-volume, liver-surgery centers. In modern literature, a detailed, operative description of robotic technique for this operation with outcome data is lacking. This video article demonstrates a pure robotic Klatskin Type 3A resection with clinical outcomes of our initial series.
A 77-year-old man presented with jaundice and findings of bilateral, intrahepatic, ductal dilation (Right > Left). Radiological imaging showed a type 3A Klatskin tumor with associated thrombosis of the right, anterior portal vein. A further endoscopic evaluation with cholangioscopy confirmed a high-grade Bismuth 3A biliary malignant stricture. Endoscopic drainage was achieved with placement of two, 7-French, 15-cm, plastic, endobiliary stents. A 3-D anatomical liver reconstruction showed a 2-cm mass located in the area of right, anterior, sectoral, Glissonean pedicle with standardized, future, liver-remnant (left hepatic lobe) volume of 50%. The patient was placed supine on the operating table. General endotracheal anesthesia was administered. After exclusion of metastatic peritoneal disease with diagnostic laparoscopy, cholecystectomy and systematic radical portal lymphadenectomy were first completed with a goal to obtain more than six lymph nodes. After appropriate portal lymphadenectomy, the common bile duct was isolated and transected at the level of pancreatic head. The plastic, endobiliary stents were removed, and a distal common bile duct margin was sent for a frozen-section examination to rule out distal extension of the cholangiocarcinoma. A small, accessory, right, hepatic artery lateral to the main portal vein was ligated with locking clips and removed together with the adjacent nodes and lymphatic bearing tissues. The intrapancreatic portion of the distal common bile duct was suture closed once the distal common bile duct margin was confirmed to be negative for neoplasia by the frozen-section examination. The proximal bile-duct dissection commenced cephalad toward the hilar bifurcation. Once the biliary bifurcation has been adequately dissected and detached from the hilar plate, the distal, left, hepatic duct was then transected near the base of the umbilical fissure to gain an R-0 resection margin. A second frozen-section specimen was obtained from the left, hepatic duct cut edge to ensure an absence of infiltrating tumor cells on the future, bile-duct remnant side. Division of short, hepatic veins off the inferior vena cava (IVC) were next completed. Once the line of hepatic-parenchymal transection was confirmed by using indocyanine green administration, the right hepatic artery and portal vein were ligated and clipped. The liver, parenchymal transection began with a crush-clamp technique utilizing robotic, fenestrated bipolar forceps and a vessel-sealing device. Preservation of the middle hepatic vein is always the preferred technique to avoid congestion of the left medial sector of the liver. The entire right hepatic lobe and the caudate lobe were removed en bloc. A large, Makuuchi ligament was isolated and divided by using a robotic, vascular-load stapler once the liver is open-booked. Finally, the root of the right hepatic vein was exposed and transected flush to the IVC by using another load of robotic vascular stapler. The biliary reconstruction then began by creating a 60-cm, roux limb for a hepaticojejunostomy bilioenteric anastomosis. A side-to-side, stapled jejunojejunostomy was created by using two applications for robotic 45-mm, blue load staplers. The common enterotomy was closed with running barbed sutures. The roux limb was then transposed retrocolically toward the porta hepatis. A single end-to-side hepaticojejunostomy anastomosis was created with running absorbable 4-0 barbed sutures. Finally, a closed suction abdominal drain was placed before closing.
The operative time was approximately 8 hours with 150 ml of blood loss. The postoperative course was unremarkable. The final pathology report confirmed a moderately differentiated perihilar cholangiocarcinoma with negative resection margins. Ten lymph nodes were harvested. No nodal metastasis or lymphovascular invasion was found. Since 2021, we have undertaken robotic resection of Klatskin 3A tumor in four patients with a median age of 70 years. All patients presented with jaundice, and they mainly underwent preoperative biliary drainage using ERCP. The median operative duration was 508 minutes with estimated blood loss of 150 ml. R-0 resection margins were obtained in all patients. One patient suffered from postoperative complications requiring treatment of line sepsis using intravenous antibiotics. We did not find a 90-day mortality in this series. At a median follow-up period of 15 months, all of the patients were alive without any evidence of disease recurrence.
Robotic resection of Type 3A Klatskin tumor is safe and feasible with appropriate experience in robotic hepatobiliary surgery, as demonstrated in this video article.
对于肝门周围胆管癌,微创切除是一种新兴技术,需要在微创肝切除和胆道重建方面都有精湛的技术。由于在血管解剖方面存在技术困难,根治性门静脉淋巴结清扫和胆肠吻合时需要精细的缝合,因此即使在高容量的肝脏手术中心,这种类型的切除通常也不会进行腹腔镜手术。在现代文献中,缺乏关于这种手术的详细操作描述和结果数据。本视频文章展示了我们初始系列中一种纯机器人 Klatskin 3A 切除术的操作,并介绍了其临床结果。
一名 77 岁男性因黄疸和双侧肝内胆管扩张(右肝>左肝)就诊。影像学检查显示 3A 型 Klatskin 肿瘤,伴有右前门静脉血栓形成。进一步的内镜检查和胆管镜检查证实为高位 Bismuth 3A 胆管恶性狭窄。通过放置两个 7-French、15-cm 的塑料内置支架进行了内镜引流。三维解剖性肝脏重建显示在右前叶、扇段、Glissonean 蒂区域有一个 2cm 的肿块,未来的左肝叶剩余标准体积为 50%。患者仰卧在手术台上。给予全身气管内麻醉。排除腹膜转移疾病后,进行腹腔镜胆囊切除术和系统根治性门静脉淋巴结清扫术,目标是获得超过 6 个淋巴结。适当的门静脉淋巴结清扫后,游离胆总管并在胰头水平横断。取出塑料内置支架,对远端胆总管进行冷冻切片检查,以排除胆管癌的远端延伸。小的、副肝右动脉位于主门静脉的外侧,用锁定夹夹闭并与相邻的淋巴结和淋巴组织一起切除。一旦远端胆总管边缘通过冷冻切片检查确认无肿瘤累及,即可缝合关闭胰内部分的远端胆总管。近端胆管解剖从肝门分叉处向头侧进行。一旦充分游离胆管分叉并与肝门板分离,就可以在脐裂基底附近横断左肝内胆管,以获得 R0 切除边缘。从左肝内胆管切缘再次获得第二个冷冻切片标本,以确保未来胆管残端侧无浸润性肿瘤细胞。接下来完成下腔静脉(IVC)下短肝静脉的分离。一旦通过使用吲哚菁绿给药确认肝实质离断线,就可以结扎和夹闭右肝动脉和门静脉。肝实质离断始于使用机器人、有孔双极夹和血管密封装置的压碎夹技术。始终首选保留中肝静脉的技术,以避免左内侧肝段的充血。整块切除右肝叶和尾状叶。一旦打开肝脏,就可以使用机器人血管吻合器分离并切断大的 Makuuchi 韧带。最后,暴露右肝静脉根部,并用另一个机器人血管吻合器的吻合器紧贴 IVC 横断。然后开始胆道重建,创建一个 60cm 的 Roux 支用于肝肠吻合。通过两次应用机器人 45mm 蓝色吻合器创建侧侧吻合的空肠空肠吻合。通过连续缝合关闭共同肠切开术。然后将 Roux 支经结肠后转位至肝门。用连续可吸收 4-0 带刺缝线创建单端侧肝肠吻合术。最后,在关闭前放置闭式负压引流管。
手术时间约为 8 小时,出血量为 150ml。术后过程无明显异常。最终的病理报告证实为中度分化的肝门周围胆管癌,切缘阴性。采集了 10 个淋巴结。未发现淋巴结转移或血管淋巴管侵犯。自 2021 年以来,我们对 4 名 Klatskin 3A 肿瘤患者进行了机器人切除,中位年龄为 70 岁。所有患者均因黄疸就诊,主要通过 ERCP 进行术前胆道引流。中位手术时间为 508 分钟,估计出血量为 150ml。所有患者均获得 R0 切除边缘。一名患者术后发生并发症,需要静脉内抗生素治疗线感染。本系列未发现 90 天死亡率。在中位随访 15 个月时,所有患者均存活,无疾病复发迹象。
在具有适当机器人肝胆手术经验的情况下,机器人切除 3A 型 Klatskin 肿瘤是安全可行的,正如本视频文章所示。