Kreller T, Boccaccini A R, Jonitz-Heincke A, Detsch R
Institute of Biomaterials, Department of Materials Science and Engineering, Friedrich Alexander-University Erlangen-Nuremberg, 91058 Erlangen, Germany.
Research Laboratory for Biomechanics and Implant Technology, Department of Orthopedics, Rostock University Medical Center, 18057 Rostock, Germany.
Biomater Adv. 2025 Apr;169:214191. doi: 10.1016/j.bioadv.2025.214191. Epub 2025 Jan 15.
Biophysical stimuli such as alternating electrical fields can mimic endogenous electrical potentials and currents in natural bone. This can help to improve the healing and reconstruction of bone tissue. However, little is known about the combined influence of biomaterials and alternating electric fields on bone cells. Therefore, this study aimed to investigate the impact of both, biomaterials and alternating electric fields, on osteoblast as well as osteoclast differentiation. Initially, either RAW 264.7 or MC3T3-E1 cells were seeded on Ti6Al4V substrates as a load-bearing implant material, modified with biomimetic calcium phosphate (BCP), or uncoated as a reference. The cells were stimulated towards osteoclastic and osteoblastic differentiation via respective growth factors. The effects of BCP substrate modification on cell differentiation were examined after 7 days for RAW 264.7 and after 14 days for MC3T3-E1 cells. In a further series of tests, either RAW 264.7 or MC3T3-E1 cells were seeded on BCP-modified Ti6Al4V substrates, stimulated towards differentiation using growth factors, and further electrically stimulated via alternating electric fields of different voltages and frequencies. In parallel to the first test series RAW 264.7 and MC3T3-E1 cells were stimulated for 7 and 14 days, respectively. Cell morphology was examined via scanning electron microscopy. Cell viabilities were assessed via WST-8 assay. Electrically stimulated MC3T3-E1 cell orientation was evaluated based on fluorescence microscopy images. Marker genes were examined via qPCR. While BCP increased osteoclast-specific gene expression, it had the opposite effect on osteoblast-related genes compared to respective cells seeded on uncoated Ti6Al4V substrates. ES with different parameters showed a broad cellular response due to electrocoupling. While cell viability assessments and gene expression analyses showed clear differences between ES samples and unstimulated controls, only minor cell morphology and orientation differences were observed. Furthermore, there was no clear trend towards a dominant influence of either voltage or frequency as control parameters. Further studies were initiated to investigate the underlying intracellular mechanisms targeted by ES. This work provides an introduction to the targeted control of cellular processes using defined electric fields. The optimization of voltage and frequency could provide therapeutic windows to control specific cellular functions and potentially improve bone regeneration and remodeling processes.
生物物理刺激,如交变电场,可以模拟天然骨骼中的内源性电位和电流。这有助于改善骨组织的愈合和重建。然而,关于生物材料和交变电场对骨细胞的综合影响,人们了解甚少。因此,本研究旨在探讨生物材料和交变电场对成骨细胞以及破骨细胞分化的影响。最初,将RAW 264.7细胞或MC3T3-E1细胞接种在作为承重植入材料的Ti6Al4V基底上,该基底用仿生磷酸钙(BCP)修饰,或未涂层作为对照。通过各自的生长因子刺激细胞向破骨细胞和成骨细胞分化。对于RAW 264.7细胞,在7天后检查BCP底物修饰对细胞分化的影响;对于MC3T3-E1细胞,在14天后检查。在另一系列测试中,将RAW 264.7细胞或MC3T3-E1细胞接种在BCP修饰的Ti6Al4V基底上,使用生长因子刺激其分化,并通过不同电压和频率的交变电场进一步进行电刺激。与第一个测试系列并行,分别对RAW 264.7细胞和MC3T3-E1细胞进行7天和14天的刺激。通过扫描电子显微镜检查细胞形态。通过WST-8测定评估细胞活力。基于荧光显微镜图像评估电刺激的MC3T3-E1细胞的取向。通过qPCR检测标记基因。虽然BCP增加了破骨细胞特异性基因的表达,但与接种在未涂层Ti6Al4V基底上的相应细胞相比,它对成骨细胞相关基因有相反的影响。不同参数的电刺激由于电耦合显示出广泛的细胞反应。虽然细胞活力评估和基因表达分析显示电刺激样品与未刺激对照之间存在明显差异,但仅观察到微小的细胞形态和取向差异。此外,作为控制参数,电压或频率的主导影响没有明显趋势。已启动进一步研究以调查电刺激所针对的潜在细胞内机制。这项工作介绍了使用特定电场对细胞过程进行靶向控制。电压和频率 的优化可以提供治疗窗口来控制特定的细胞功能,并有可能改善骨再生和重塑过程。