Al-Mur Bandar A
Department of Environmental Sciences, Faculty of Meteorology, Environment and Arid Land Agriculture, King Abdulaziz University, Jeddah, Saudi Arabia.
Saudi J Biol Sci. 2020 Nov;27(11):3087-3098. doi: 10.1016/j.sjbs.2020.07.012. Epub 2020 Jul 10.
In this study, eighteen sites at Jeddah coastal area, Red Sea, have been assessed for water quality status, depending on nutrients, metals, Chlorophyll-a (Chl-a) and physical variables during 2018 and 2019. The investigated parameters of the Water Quality Index (WQI) are temperature, pH, salinity, dissolved oxygen (DO), DO saturation, oxidizable organic matter (OOM), suspended particulate matter (SPM), Chl-a, ammonium, nitrite, nitrate, total nitrogen, reactive phosphate, total phosphorus, silicate, Zn, Fe, Mn Cu, Cd, Pb, and Ni. The results revealed that the pH values were slightly alkaline with a range of 7.85-8.20. The results of other parameters were as follow: salinity (36.95-42.61PSU), DO (5.22-6.67 mg/L), OOM (0.40-1.23 mg/L), SPM (12.39-21.5 mg/L), Chl-a (0.10-0.83 µg/L). The range of nutrients (μM) were 0.07-0.22, 0.45-1.47, 9.62-18.64, 23.31-57.65, 0.05-0.15, 0.55-2.78 and 2.54-5.51 for NH/N, NO/N, NO/N, TN, PO/P, TP and SiO/Si, respectively. Cluster analysis was used to classify the stations studied. From the current study, five clusters were found, indicating the need to perform cluster analysis in the water quality assessment process to confirm the durability and consistency of the data discovered in the current application.
在本研究中,对红海吉达沿海地区的18个地点在2018年和2019年期间的水质状况进行了评估,评估依据为营养物质、金属、叶绿素a(Chl-a)和物理变量。水质指数(WQI)的调查参数包括温度、pH值、盐度、溶解氧(DO)、DO饱和度、可氧化有机物(OOM)、悬浮颗粒物(SPM)、Chl-a、铵、亚硝酸盐、硝酸盐、总氮、活性磷酸盐、总磷、硅酸盐、锌、铁、锰、铜、镉、铅和镍。结果显示,pH值呈微碱性,范围为7.85 - 8.20。其他参数的结果如下:盐度(36.95 - 42.61PSU)、DO(5.22 - 6.67mg/L)、OOM(0.40 - 1.23mg/L)、SPM(12.39 - 21.5mg/L)、Chl-a(0.10 - 0.83μg/L)。NH₄⁺/N、NO₂⁻/N、NO₃⁻/N、TN、PO₄³⁻/P、TP和SiO₃²⁻/Si的营养物质(μM)范围分别为0.07 - 0.22、0.45 - 1.47、9.62 - 18.64、23.31 - 57.65、0.05 - 0.15、0.55 - 2.78和2.54 - 5.51。聚类分析用于对所研究的站点进行分类。从当前研究中发现了五个聚类,表明在水质评估过程中需要进行聚类分析,以确认当前应用中发现的数据的耐久性和一致性。